Measure the height of the base cabinets. Most standard cabinets are 34-1/2&rdquo high. Add 1-1/2&rdquo for a standard countertop and 18 inches for a standard backsplash, (though some designers now want a 20-inch backsplash to make room for small appliances). With an 18-inch backsplash, the total measurement should be 54 inches from the floor to the bottom of the upper cabinets. If your floor is not level, be sure to measure from the highest point along the wall.
Draw a horizontal line across the wall at this 54-inch point which will serve as a guide for hanging the cabinets. Be sure to use a level to assure this line is true horizontal. So let us take a look at favorite diy one wall small kitchen kitchen storage with 29 pictures below.
1. Best Microwave Storage Ideas On Best Small
Use a stud finder to locate the wall studs. The wall studs are crucial to properly support the weight of the cabinets. Note: Pay careful attention to the position of all electrical wiring and plumbing.
2. Best Pantry Organizers Kitchen Pantries Pantry And Storage
3. Best Small Apartment Kitchen Ideas On Tiny
Secure a ledger (support) board to the wall, screwing it into the marked studs to temporarily support the weight of the cabinets during the installation. Be sure the doors and hardware are removed from the cabinets to make them lighter and easier to install.
Attach as many cabinets together as you can safely lift and install on the ledger board usually two. Use clamps to fix the stiles (the vertical pieces on the face of the cabinet frames) of the cabinets together and check for plumb, making sure the fronts of the cabinets are flush. Next, predrill and secure the two cabinets together at the stile with the screws (Image 1). Affix one screw on the top and bottom in the front and back where the two cabinets meet.
4. Best Ikea Kitchen Diy Ideas On Ikea Kitchen
Lift the cabinets onto the ledger board and check for plumb and level. Shim the cabinets if necessary.